#Dyna mptool serial#
Further (in the previous window that appears after this, you can set VID and PID(if you want to change the name of the manufacturer of the controller and its type displayed in CHIP GENIUS - to determine the flash drive by the flashing utility in case of subsequent flashing it will not affect), Serial No.
it will be detected not as a flash, but as an HDD),Īs well as block the partition from being overwritten - ( write protect), immediately writing the necessary files to it, registering the path to the folder with them (but I did not do this, because protection against overwriting was not included in my needs). The first Flash partition can be done - ( Fixed) (i.e. If the engine (see above) was not touched, there will be CD + 1 flash section, otherwise - CD and 2 flash drives (the volume of each depends on the position of the engine in the upper left corner). Lun0 and Lun1 are partitions that will actually be seen as a USB flash drive. In order for the image to work indefinitely, 255 (\u003d\u003d unlimited) must be entered in this field If we write 10 (as stated in the instructions), then the flash CD will appear and work exactly 10 USB flash drive connections. Turns out autorun counter this is the number of times the Flash CD will appear on the system. Be sure to write the parameter autorun counter - it is responsible for all the glitches associated with the disappearance of the flash CD after several downloads: I tried a 2.5 GB image, everything is fine.Į). The size of the CD-part is set automatically depending on the size of the image. Top right corner - check the box Enable CD-Rom Booting (make the CD-ROM bootable) and write the path to the ISO image. make CD + flash + Flash), then move the engine - set the size of the partitions. In this window: Top left corner - check the box Enable CD-ROM, if you need to split the rest of the CD-ROM, and split a part into 2 more partitions (i.e. For some, the flash drive was identified in the program (it turned green, Ready) only after that. In the utility, click -\u003e Advanced -\u003e in the window Password enter numbers 123456ĭ). We connect the flash drive to the USB connector of the PC. If you have a different chip, not from Skymedi, then you can not read further.Īnd). (my flash drive was with an SK6211 chip, and the SK6211_20090227_BA program came up to it) We find which programs are designed to work with your flash drive. Then go to the iFlash database page and enter VID or PID to the search bar. (be sure to write down or save the data that it will show, because in case of bad firmware, this will help you find the program you need) This can be done by downloading and running the ChipGenius v3.0 utility Need to find out the chipset manufacturer and values VID and PID.
#Dyna mptool how to#
I learned a lot about what chipsets are, what to do with a flash drive if it is not detected by the system, where to look for utilities for program recovery, and how to put the flash drive into test mode by closing the legs on the chip. Therefore, I decided to devote Saturday to an interesting case of studying how flash drives work.
#Dyna mptool drivers#
I found a description about various methods for installing additional drivers for the second section, but this did not suit me, because this must be installed on every PC you connect to for the first time. It was not possible to do this by ordinary means, since after creating partitions, Windows refused to see the second partition.
#Dyna mptool install#
The computer did not have a CD-ROM, and it was not interesting to install my own, and for a long time I was interested in how to divide my 8 Gb flash drive into several partitions. It took me to put the system on an old computer.
0 kommentar(er)
